Return to list

Operation and common faults of high-performance butterfly valves

2025-05-07

Operation and common faults of high-performance butterfly valves

Operation, Use, and Common Troubleshooting of Ball Valves

I. Operation and Use of Ball Valves

A ball valve is a valve that uses a ball to control the flow of fluid. Its operation is relatively simple, mainly consisting of two steps: opening and closing.

1. Opening operation: Slowly rotate the valve handle so that the ball is parallel to the valve seat channel. Fluid can then pass through smoothly.

2. Closing operation: Rotate the valve handle in the opposite direction to make the ball tightly fit against the valve seat, preventing fluid from passing through.

During use, ensure that the operation is smooth and slow to avoid sudden opening and closing that could cause fluid impact and valve damage. Regularly check the sealing performance of the ball valve to ensure its normal operation.

II. Common Ball Valve Faults

1. Leakage: The sealing performance of the ball valve deteriorates, leading to fluid leakage. Possible causes include wear and tear of the ball and valve seat, and aging of the sealing ring. The solution is to replace worn parts and regularly inspect and maintain.

2. Stiff Rotation: The valve handle rotates stiffly, possibly making opening or closing difficult. This may be due to rust or dust on the handle, bearings, etc. The solution is to lubricate the bearings, remove dust, or replace rusty parts.

3. Excessive Operating Torque: Excessive resistance is encountered when opening or closing. Possible causes include accumulation of impurities between the ball and valve seat, and valve wear. The solution is to clean the impurities and repair or replace the valve.

4. Valve Cannot Be Opened or Closed: This may be due to the valve seizing up after prolonged use. The solution is to inspect and replace the internal wear parts of the valve, such as the sealing ring and support seat.

5. Valve Loosening: Prolonged use or improper installation may cause the valve to loosen. The solution is to reinstall and tighten, and regularly inspect.

III. Summary

As a common fluid control device, ball valves are relatively simple to operate, but attention to detail is still required during use to avoid sudden opening and closing and excessive force. For common faults such as leakage and stiff rotation, timely inspection and repair are necessary. During repair, attention should be paid to replacing worn parts, cleaning impurities, and regularly inspecting and maintaining to ensure the normal operation of the ball valve. Correct installation and use are also key to preventing faults. This article hopes to help you better understand the operation, use, and troubleshooting of common ball valve problems.

Previous:

Contact us

Phone/WeChat

86-13559252511

Email:541248233@qq.com

Address:No. 39, Floor 1, Huli Park, Tong'an District Industrial Concentration Zone, Xiamen City